roboforum.ru

<machine experimental="0">
      <name> skb-kiparis Gen X(115200 Baud)</name>
      <geometry type="cartesian">
         <axis id="x" length="205" maxfeedrate="5000" stepspermm="31.496" endstops="min"/>
         <axis id="y" length="195" maxfeedrate="5000" stepspermm="31.496" endstops="min"/>
         <axis id="z" length="140" maxfeedrate="200" stepspermm="1133.858" endstops="min"/>
      </geometry>
      <tools>
         <tool name="Stepper-based extruder" type="extruder" material="abs" motor="true" floodcoolant="false" mistcoolant="false" fan="true" valve="false" collet="false" heater="true" stepper_axis="a" motor_steps="1000" heatedplatform="true" />
      </tools>
      <clamps></clamps>
      <firmware url="http://download.skb-kiparis.ru/firmware.xml" autoupgrade="false"></firmware>
      <help name="Teacup Help" url="http://reprap.org/wiki/Teacup_Firmware"></help>
      <driver name="reprap5d">
          <okAfterResend>false</okAfterResend> <!-- Teacup option for reprap5d driver -->
          <alwaysRelativeE>true</alwaysRelativeE> <!-- Teacup option for reprap5d driver -->
          <okAfterStart>true</okAfterStart> <!-- Teacup option for reprap5d driver -->
          <pulserts>false</pulserts>
          <waitforstart enabled="false"></waitforstart>
          <debugLevel>0</debugLevel>
          <fived>true</fived>
          <rate>115200</rate>
      </driver>
      <warmup>
      </warmup>
      <cooldown>
      </cooldown>
   </machine>