Принтер новый не собранный. Все оси на линейных подшипниках. Печатает как PLA так и ABS.
http://www.gazeta.ru/tech/2013/07/10_a_5420873.shtml
Рама сделана из очень прочного станкого алюминевого профиля.
Цена 25000р
Тел 89258880388 Сергей
Звонить строго с 10-00 до 24-00
Linear ball bearings: 8 and 10 mm (0.314" and 0.393")
Technology: FFF (Fused Filament Fabrication) for PLA and ABS
Power supply: 12 V / 3 A max.
FTDI USB 2.0 to Serial
Dimensions of printable area: 20 x 20 x 20cm / 7.87 x 7.87 x 7.87"
Typical printing speed: 120 mm/s
Maximum print speed: 150 to 300 mm/s (depending on the object to be printed)
Extrusion nozzle: 0.5 mm
Extrusion thermistor: NTC 100K
Extruded aluminum profiles: 27.5 mm / 1.08" wide
Movement: 4 NEMA 17 stepper motors
Resolution:
Nominal mechanical resolution:
X and Y: 0.015 mm / 590.55 µin (smallest step the printing plate can move in the X and Y direction)
Z: 0.781 µm / 30.74 µin(smallest step the printing plate can move in the Z direction)
Nominal printing resolution:
Wall thickness (X,Y): 0.5 mm / 0.019"
Layer thickness (Z): 0.20 - 0.25 mm / 0.0078 - 0.0098"
Dimensions:
Width: 50cm / 19.7"
Depth: 42cm / 16.5"
Height: 62cm / 24.4"
Weight: 9Kg / 19.84lbs
Software: Repetier version 0.84 and up http://www.repetier.com
included: 5m PLA black sample