Daniil94 » 28 янв 2014, 16:26
В качестве программатора использую arduino nano v.3
- Код: Выделить всё • Развернуть
C:\Новая папка>avrdude -F -q -C avrdude.conf -p atmega8 -c avrisp -P COM3 -b 192
00 -e -U flash:w:ATmegaBOOT.hex
avrdude: AVR device initialized and ready to accept instructions
avrdude: Device signature = 0x000000
avrdude: Yikes! Invalid device signature.
avrdude: Expected signature for ATMEGA8 is 1E 93 07
avrdude: erasing chip
avrdude: reading input file "ATmegaBOOT.hex"
avrdude: input file ATmegaBOOT.hex auto detected as Intel Hex
avrdude: writing flash (8166 bytes):
avrdude: 8166 bytes of flash written
avrdude: verifying flash memory against ATmegaBOOT.hex:
avrdude: load data flash data from input file ATmegaBOOT.hex:
avrdude: input file ATmegaBOOT.hex auto detected as Intel Hex
avrdude: input file ATmegaBOOT.hex contains 8166 bytes
avrdude: reading on-chip flash data:
avrdude: verifying ...
avrdude: verification error, first mismatch at byte 0x0000
0xff != 0x00
avrdude: verification error; content mismatch
avrdude: safemode: Fuses OK
avrdude done. Thank you.
Aseris » 28 янв 2014, 17:19
Провода проверь, оно чип невидит