roboforum.ru

C:\Новая папка>avrdude -F -q -C avrdude.conf -p atmega8 -c avrisp -P COM3 -b 192
00 -e -U flash:w:ATmegaBOOT.hex

avrdude: AVR device initialized and ready to accept instructions
avrdude: Device signature = 0x000000
avrdude: Yikes!  Invalid device signature.
avrdude: Expected signature for ATMEGA8 is 1E 93 07
avrdude: erasing chip
avrdude: reading input file "ATmegaBOOT.hex"
avrdude: input file ATmegaBOOT.hex auto detected as Intel Hex
avrdude: writing flash (8166 bytes):
avrdude: 8166 bytes of flash written
avrdude: verifying flash memory against ATmegaBOOT.hex:
avrdude: load data flash data from input file ATmegaBOOT.hex:
avrdude: input file ATmegaBOOT.hex auto detected as Intel Hex
avrdude: input file ATmegaBOOT.hex contains 8166 bytes
avrdude: reading on-chip flash data:
avrdude: verifying ...
avrdude: verification error, first mismatch at byte 0x0000
         0xff != 0x00
avrdude: verification error; content mismatch

avrdude: safemode: Fuses OK

avrdude done.  Thank you.