; KISSlicer - FREE
; Windows
; version 1.1.0.14
; Built: May  8 2013, 11:25:54
; Running on 4 cores
;
; Saved: Tue Feb 18 22:43:10 2014
; 'cube_150mm_kis2.gcode'
;
; *** Printer Settings ***
;
; printer_name = Prusa i3
; bed_STL_filename = 
; extension = gcode
; cost_per_hour = 200
; g_code_prefix = 473238203B20686F6D6520616C6C20617865730A4731
;     205A35204635303030203B206C696674206E6F7A7A6C650A3B205B6D
;     6D5D206D6F64650A4732310A3B206162736F6C757465206D6F64650A
;     473930
; g_code_warm = 3B2053656C6563742065787472756465722C207761726D
;     2C2070757267650A0A3B204266422D7374796C650A4D3C4558542B31
;     3E303420533C54454D503E0A4D3534320A4D35353C4558542B313E20
;     50333230303020533930300A4D3534330A0A3B2035442D7374796C65
;     0A543C4558542B303E0A4D31303920533C54454D503E0A
; g_code_cool = 3B2047756172616E746565642073616D65206578747275
;     6465722C20636F6F6C696E6720646F776E0A0A3B204266422D737479
;     6C650A4D3C4558542B313E303420533C54454D503E0A0A3B2035442D
;     7374796C650A4D31303420533C54454D503E0A
; g_code_N_layers = 3B204D617962652072652D686F6D65205820262059
;     3F
; g_code_postfix = 4D313034205330203B207475726E206F66662074656
;     D70657261747572650A473238205830205930203B20686F6D6520582
;     0617869730A4D383420202020203B2064697361626C65206D6F746F7
;     2730A
; post_process = NULL
; every_N_layers = 0
; num_extruders = 1
; firmware_type = 1
; add_comments = 1
; fan_on = M106
; fan_off = M107
; fan_pwm = 1
; add_m101_g10 = 0
; z_speed_mm_per_s = 3.5
; z_settle_mm = 0
; bed_size_x_mm = 200
; bed_size_y_mm = 200
; bed_size_z_mm = 175
; bed_offset_x_mm = 100
; bed_offset_y_mm = 100
; bed_offset_z_mm = 0
; bed_roughness_mm = 0
; travel_speed_mm_per_s = 120
; first_layer_speed_mm_per_s = 20
; dmax_per_layer_mm_per_s = 50
; xy_accel_mm_per_s_per_s = 1500
; lo_speed_perim_mm_per_s = 20
; lo_speed_solid_mm_per_s = 40
; lo_speed_sparse_mm_per_s = 50
; hi_speed_perim_mm_per_s = 40
; hi_speed_solid_mm_per_s = 60
; hi_speed_sparse_mm_per_s = 75
; ext_gain_1 = 1
; ext_material_1 = 1
; ext_axis_1 = 0
; ext_gain_2 = 1
; ext_material_2 = 0
; ext_axis_2 = 0
; ext_gain_3 = 1
; ext_material_3 = 0
; ext_axis_3 = 0
; model_ext = 0
; support_ext = 0
; support_body_ext = 0
; raft_ext = 0
; solid_loop_overlap_fraction = 0.5
;
; *** Material Settings for Extruder 1 ***
;
; material_name = PLA
; g_code_matl = 3B204D617962652073657420736F6D65206D6174657269
;     616C2D737065636966696320472D636F64653F
; fan_Z_mm = 1
; fan_loops_percent = 100
; fan_inside_percent = 0
; fan_cool_percent = 70
; temperature_C = 185
; keep_warm_C = 185
; first_layer_C = 185
; bed_C = 60
; sec_per_C_per_C = 0
; flow_min_mm3_per_s = 0.01
; flow_max_mm3_per_s = 10
; destring_suck = 1.25
; destring_prime = 1.25
; destring_min_mm = 0.1
; destring_trigger_mm = 0.1
; destring_speed_mm_per_s = 10
; Z_lift_mm = 0
; min_layer_time_s = 5
; wipe_mm = 0
; cost_per_cm3 = 0
; flowrate_tweak = 1
; fiber_dia_mm = 2.9
; color = 0
;
; *** Style Settings ***
;
; style_name = PLA 0.25
; layer_thickness_mm = 0.25
; extrusion_width_mm = 0.35
; num_loops = 3
; skin_thickness_mm = 0.75
; infill_extrusion_width = 0.4
; infill_density_denominator = 4
; stacked_layers = 1
; use_destring = 1
; use_wipe = 0
; loops_insideout = 1
; infill_st_oct_rnd = 1
; inset_surface_xy_mm = 0
; seam_jitter_degrees = 0
; seam_depth_scaler = 1
;
; *** Support Settings ***
;
; support_name = No support
; support_sheathe = 0
; support_density = 0
; support_inflate_mm = 0
; support_gap_mm = 0.5
; support_angle_deg = 45
; support_z_max_mm = -1
; sheathe_z_max_mm = -1
; raft_mode = 1
; prime_pillar_mode = 0
; raft_inflate_mm = 0
;
; *** Actual Slicing Settings As Used ***
;
; layer_thickness_mm = 0.25
; extrusion_width = 0.35
; num_ISOs = 3
; wall_thickness = 0.75
; infill_style = 5
; support_style = 0
; support_angle = 44.9
; destring_min_mm = 0.1
; stacked_infill_layers = 1
; raft_style = 1
; extra_raft_depth = 0
; oversample_res_mm = 0.125
; crowning_threshold_mm = 1
; loops_insideout = 1
; solid_loop_overlap_fraction = 0.5
; inflate_raft_mm = 0
; inflate_support_mm = 0
; model_support_gap_mm = 0.5
; infill_st_oct_rnd = 1
; support_Z_max_mm = 1e+020
; sheathe_Z_max_mm = 0
; inset_surface_xy_mm = 0
; seam_jitter_degrees = 0
; seam_depth_scaler = 1
; Speed vs Quality = 0.00
; Perimeter Speed = 40.00
; Solid Speed = 60.00
; Sparse Speed = 75.00
;
; *** G-code Prefix ***
;
G28 ; home all axes
G1 Z5 F5000 ; lift nozzle
; [mm] mode
G21
; absolute mode
G90
;
; *** Main G-code ***
;
; BEGIN_LAYER_OBJECT z=0.25
;
; *** Warming Extruder 1 to 185 C ***
; Select extruder, warm, purge
; BfB-style
M104 S185
M542
M551 P32000 S900
M543
; 5D-style
T0
M109 S185

;
;
;
; 'Skirt', 0.5 [feed mm/s], 20.0 [head mm/s]
G1 X172.43 Y172.43 Z0.25 E0 F7200
G1 E1.25 F600
G1 X27.57 Y172.43 E3.8378 F1200
G1 X27.57 Y27.57 E3.8378
G1 X172.43 Y27.57 E3.8378
G1 X172.43 Y172.43 E3.8378
;
; 'Wipe (and De-string)', 0.0 [feed mm/s], 20.0 [head mm/s]
G1 E-1.25 F600
;
; 'Skirt', 0.5 [feed mm/s], 20.0 [head mm/s]
G1 X176.31 Y176.31 E0 F7200
G1 E1.25 F600
G1 X176.04 Y176.54 E0.0094 F1200
G1 X175.7 Y176.71 E0.01
G1 X175.2 Y176.81 E0.0137
G1 X24.8 Y176.81 E3.9846
G1 X24.29 Y176.7 E0.0138
G1 X23.96 Y176.54 E0.0098
G1 X23.69 Y176.31 E0.0094
G1 X23.46 Y176.04 E0.0093
G1 X23.29 Y175.7 E0.01
G1 X23.19 Y175.19 E0.0138
G1 X23.19 Y24.8 E3.9845
G1 X23.3 Y24.29 E0.0139
G1 X23.46 Y23.96 E0.0098
G1 X23.69 Y23.69 E0.0093
G1 X23.96 Y23.46 E0.0094
G1 X24.3 Y23.29 E0.01
G1 X24.8 Y23.19 E0.0137
G1 X175.2 Y23.19 E3.9846
G1 X175.71 Y23.3 E0.0138
G1 X176.04 Y23.46 E0.0098
G1 X176.31 Y23.69 E0.0094
G1 X176.54 Y23.96 E0.0093
G1 X176.71 Y24.3 E0.01
G1 X176.81 Y24.85 E0.015
G1 X176.81 Y175.15 E3.982
G1 X176.71 Y175.7 E0.015
G1 X176.54 Y176.04 E0.01
G1 X176.31 Y176.31 E0.0093
;
; 'Wipe (and De-string)', 0.0 [feed mm/s], 20.0 [head mm/s]
G1 E-1.25 F600
;
; 'Perimeter', 0.3 [feed mm/s], 20.0 [head mm/s]
G1 X174.3 Y174.19 E0 F7200
G1 E1.25 F600
G1 X174.14 Y174.14 E0.0022 F1200
G1 X173.87 Y174.2 E0.0038
G1 X26.01 Y174.19 E1.9587
G1 X25.84 Y174.14 E0.0022
G1 X25.8 Y173.87 E0.0037
G1 X25.81 Y26.01 E1.9587
G1 X25.86 Y25.84 E0.0023
G1 X26.13 Y25.8 E0.0036
G1 X173.87 Y25.8 E1.957
G1 X174.15 Y25.85 E0.0038
G1 X174.2 Y26.13 E0.0039
G1 X174.2 Y173.87 E1.957
G1 X174.14 Y174.14 E0.0037
G1 X174.19 Y174.3 E0.0022
;
; 'Wipe (and De-string)', 0.0 [feed mm/s], 20.0 [head mm/s]
G1 E-1.25 F600
;
; 'Perimeter', 0.3 [feed mm/s], 20.0 [head mm/s]
G1 X174.68 Y174.59 E0 F7200
G1 E1.25 F600
G1 X174.8 Y174.8 E0.0033 F1200
G1 X25.2 Y174.8 E1.9818
G1 X25.2 Y25.2 E1.9819
G1 X174.8 Y25.2 E1.9818
G1 X174.8 Y174.8 E1.9819
G1 X174.59 Y174.68 E0.0032
;
; 'Wipe (and De-string)', 0.0 [feed mm/s], 20.0 [head mm/s]
G1 E-1.25 F600
;
; 'Crown', 0.2 [feed mm/s], 20.0 [head mm/s]
G1 X25.58 Y25.58 E0 F7200
G1 E1.25 F600
G1 X25.53 Y25.82 E0.0027 F1200
G1 X25.5 Y25.98 E0.0018
G1 X25.5 Y174 E1.6112
G1 X25.57 Y174.41 E0.0045
G1 X25.87 Y174.49 E0.0034
G1 X26 Y174.5 E0.0014
G1 X174 Y174.5 E1.611
G1 X174.41 Y174.43 E0.0046
G1 X174.49 Y174.13 E0.0033
G1 X174.5 Y174 E0.0014
G1 X174.5 Y26 E1.6111
G1 X174.43 Y25.59 E0.0045
G1 X174.13 Y25.51 E0.0034
G1 X174 Y25.5 E0.0013
G1 X25.99 Y25.5 E1.6112
G1 X25.82 Y25.53 E0.0019
;
; 'Wipe (and De-string)', 0.0 [feed mm/s], 20.0 [head mm/s]
G1 E-1.25 F600
G1 X25.82 Y25.53 Z0.5 E0 F210
; END_LAYER_OBJECT z=0.25
; BEGIN_LAYER_OBJECT z=0.50
;
; 'Perimeter', 0.5 [feed mm/s], 40.0 [head mm/s]
G1 X174.3 Y174.19 Z0.5 E0 F7200
G1 E1.25 F600
G1 X174.14 Y174.14 E0.0022 F2400
G1 X173.87 Y174.2 E0.0037
G1 X26.01 Y174.19 E1.9588
G1 X25.84 Y174.14 E0.0022
G1 X25.8 Y173.87 E0.0037
G1 X25.81 Y26.01 E1.9587
G1 X25.86 Y25.84 E0.0022
G1 X26.13 Y25.8 E0.0037
G1 X173.87 Y25.8 E1.957
G1 X174.15 Y25.85 E0.0038
G1 X174.2 Y26.13 E0.0039
G1 X174.2 Y173.87 E1.957
G1 X174.14 Y174.14 E0.0037
G1 X174.19 Y174.3 E0.0022
;
; 'Wipe (and De-string)', 0.0 [feed mm/s], 70.0 [head mm/s]
G1 E-1.25 F600
;
; 'Perimeter', 0.5 [feed mm/s], 40.0 [head mm/s]
G1 X174.68 Y174.59 E0 F7200
G1 E1.25 F600
G1 X174.8 Y174.8 E0.0033 F2400
G1 X25.2 Y174.8 E1.9818
G1 X25.2 Y25.2 E1.9819
G1 X174.8 Y25.2 E1.9818
G1 X174.8 Y174.8 E1.9819
G1 X174.59 Y174.68 E0.0032
;
; 'Wipe (and De-string)', 0.0 [feed mm/s], 70.0 [head mm/s]
G1 E-1.25 F600
;
; 'Crown', 0.6 [feed mm/s], 51.0 [head mm/s]
G1 X25.58 Y25.58 E0 F7200
G1 E1.25 F600
G1 X25.53 Y25.82 E0.0027 F3061.2
G1 X25.5 Y25.98 E0.0017
G1 X25.5 Y174 E1.6113
G1 X25.57 Y174.41 E0.0045
G1 X25.87 Y174.49 E0.0034
G1 X26 Y174.5 E0.0014
G1 X174 Y174.5 E1.611
G1 X174.41 Y174.43 E0.0046
G1 X174.49 Y174.13 E0.0033
G1 X174.5 Y174 E0.0014
G1 X174.5 Y26 E1.6111
G1 X174.43 Y25.59 E0.0045
G1 X174.13 Y25.51 E0.0034
G1 X174 Y25.5 E0.0013
G1 X25.99 Y25.5 E1.6112
G1 X25.82 Y25.53 E0.0019
;
; 'Wipe (and De-string)', 0.0 [feed mm/s], 70.0 [head mm/s]
G1 E-1.25 F600
G1 X25.82 Y25.53 Z1 E0 F210
; END_LAYER_OBJECT z=0.50
;
; *** Cooling Extruder 1 to 0 C ***
; Guaranteed same extruder, cooling down
; BfB-style
M104 S0
; 5D-style
M104 S0

;
; *** G-code Postfix ***
;
M104 S0 ; turn off temperature
G28 X0 Y0 ; home X axis
M84     ; disable motors

;
;
;
; Estimated Build Time:   3.29 minutes
; Estimated Build Volume: 0.503 cm^3
; Estimated Build Cost:   $10.95
;
; *** Extrusion Time Breakdown ***
; * estimated time in [s]
; * before possibly slowing down for 'cool'
; * not including Z-travel
;	+-------------+-------------+-------------+-----------------------+
;	| Extruder #1 | Extruder #2 | Extruder #3 | Path Type             |
;	+-------------+-------------+-------------+-----------------------+
;	| 3.96077     | 0           | 0           | Move                  |
;	| 0           | 0           | 0           | Pillar                |
;	| 0           | 0           | 0           | Raft                  |
;	| 0           > 0           > 0           > Support Interface     |
;	| 0           | 0           | 0           | Support (may Stack)   |
;	| 89.8796     | 0           | 0           | Perimeter             |
;	| 0           | 0           | 0           | Loop                  |
;	| 0           > 0           > 0           > Solid                 |
;	| 0           | 0           | 0           | Sparse Infill         |
;	| 0           | 0           | 0           | Stacked Sparse Infill |
;	| 2           | 0           | 0           | Wipe (and De-string)  |
;	| 41.6141     > 0           > 0           > Crown                 |
;	| 0           | 0           | 0           | Prime Pillar          |
;	| 59.615      | 0           | 0           | Skirt                 |
;	| 0           | 0           | 0           | Pause                 |
;	| 0           > 0           > 0           > Extruder Warm-Up      |
;	+-------------+-------------+-------------+-----------------------+
; Total estimated (pre-cool) minutes: 3.28